Seat Cushion Extension, Removing and Installing

Seat Cushion Extension, Removing And Installing







1 - Seat cushion extension

Removing
- Move seat fully up.
- Remove seat.
- Using pliers or a screwdriver push both springs - 2 - inward - arrow-.
- Remove seat surface extension - 1 -.
- If necessary, disconnect seat heater wiring on both sides.
- Pull front cover - 3 - up and pull cable through.

2 - Springs (2x)
3 - Front cover

Removing
- If necessary (e.g. when removing seat cushion), remove cover completely).

Installing
- Insert seat heater harness connectors through holes on both sides of cover - 3 - and connect connectors.
- Attach cover.







4 - Guide sleeves (2x)
- Always replace

Removing
- If necessary (e.g. when removing seat cushion), push guide sleeves - 4 - together with groove-lock pliers and pull guide sleeves out.

Installing
Install in reverse order of removal

NOTE: Always replace the two guide sleeves when installing.