Output Diagnostic Test Mode (DTM) (Function 03)

Output Diagnostic Test Mode (DTM) (function 03)


NOTE:
- Output Diagnostic Test Mode (DTM) is only possible with engine idle and ignition switched on.
- If malfunctions are detected during Output Diagnostic Test Mode (DTM), determine cause of malfunction and repair.


Test sequence
- Initiate On Board Diagnostic (OBD) of parking assistance, Parking Assistance on Board Diagnostic (OBD), Initiating


Display on VAS5051:







- In selection -1-, click on the diagnostic function "03 - On Board Diagnostic (OBD)".


Display on VAS5051:







A - 1. Actuator in test
1 - Warning buzzer For parking -H15-

Warning buzzer For parking assistance is being activated and sounds in intervals.

- Click on -> button


Display on VAS5051:







A - Actuator test has ended
- End function "03 - Output Diagnostic Test Mode (DTM)" by pressing <- button.