Operation CHARM: Car repair manuals for everyone.

Front ABS Wheel Speed Sensor, Removing and Installing



ABS wheel speed sensor, removing and installing
Removing
- Loosen wheel bolts.
- Raise vehicle.
- Remove wheel.





- Remove grommet -1- from the wheel housing.
- Disconnect ABS wheel speed sensor harness connector -2-.
- Disconnect ABS wheel speed sensor wiring from retainers (arrows).
- Remove ABS speed sensor from wheel bearing housing.
When installing pay particular attention to the following points:
- Replace clamping sleeve.
- Before installing speed sensor, install sealing collar.
- Connect ABS wheel speed sensor wiring and fasten grommets into retainers.
- Turn wheels completely to left and right stop positions and check ABS wheel speed sensor wiring clearance.