Rear Bumper: Adjustments

Rear Bumper, Adjusting

Adjusting Height At Impact Absorber

- Middle underbody cover removed.







- Remove bolts - 2 -.







- Insert hex socket wrench - 5 - into threaded sleeve - 2 -.
- Adjust threaded sleeve - 2 - up or down in impact absorber - 3 -.

Adjusting Height At Bracket

- Remove battery.
- Remove rear panel trim and luggage compartment side trim.
- Pull off rubber cover and loosen screws on bracket - 4 - a few rotations.
- Adjust height of bumper to fender by shifting bracket forward or rearward.