Measuring Value Blocks (Function 08)

Read Measuring Value Block (function 08)
- Initiate On Board Diagnostic (OBD) of automatic vertical headlight aim control, Initiating


Display on VAS5051:







- Select diagnostic function "08 - read measured value block" in selection -1-.


Display on VAS5051:







1 - Enter display group Max. input value = 255
- Enter desired display group number in button field -2-, See Display group overview.
- Press -Q- button to confirm input.


Display on VAS5051:







1 - Display group X
2 - Display field 1
Display field 2
Display field 3
Display field 4


NOTE:
- If no display follows, a display field is not assigned.
- To switch to a different display group, proceed as follows:


Display group VAS5051 tester
higher Press UP arrow button.
Lower press DOWN arrow button.

- Press "08 - Erase DTC Memory" to end function <- button.


Display group overview:

Display group number Indicated on display
001 1 = Voltage supply, terminal 15
2 = Light switch
3 = condition
4 = Speed in km/h
Acceleration in meter per second square

002 1 = Front level sensor
2 = Rear level sensor
3 = Specification For actuator motors in %
4 = Time constants in seconds


Display group 001







Display group 002