Grille: Service and Repair

Removing And Installing Radiator Grill







Removing
- Release catches (arrows).
- Swing out radiator grill at top, then pull off at bottom.

Installing


NOTE: To ease assembly, apply lubricant to the PU seal.


- Install radiator grill at bottom in center (make sure it is properly centered) and pivot it into place in direction shown in inset (arrow).
- Dimension -a- = 2 mm ± 0.5 mm (0.079 in. ± 0.019 in.)
- When installing, make sure radiator grill engages audibly in position