ABS Front Axle Components, Removing and Installing

ABS front axle components, removing and installing





1. Hex bolt
^ Always replace
^ Different versions - Parts List
^ Vehicle must not be raised when tightening this bolt.
^ Tightening torque:
2. Clamping sleeve
^ Always replace
^ Left and right sides are identical
^ Before installing, grease the hole in the wheel bearing housing with lubricating paste G 000 650
^ Push into wheel bearing housing up to stop
3. Sealing collar
4. ABS wheel speed sensor
^ Install drive axle before installing speed sensor
^ Push into clamping sleeve up to stop
5. Drive axle with rotor
^ Inspect rotor for signs of dirt and damage
^ Replace outer CV joint if the rotor is damaged.
^ Outer CV joint is supplied as replacement part with rotor