DTC 17135

DTC 17135 / P0751 part 1 of 2

1) First check harness connector for contact corrosion and water ingress, replace if necessary. If there are malfunctions indicated for solenoid valves. Pay particular attention to the 16-pin harness connector at transmission between valve body and cable harness.
2) Pay attention to which hydraulic control the transmission has when selecting measuring value block.

Note: For malfunction recognition of DTCs 17135 / P0751 and 17136 / P0752
^ Short circuit to B+ is already checked with ignition switched on. During operation, all malfunction types are recognized.