DTC 18265

DTC 18265 / P1857 part 1 of 2





DTC 18265 / P1857 part 2 of 2

Note: For DTC 18265 / P1857:
^ Requirements for malfunction recognition: Malfunction of the relevant component is recognized by the Engine Control Module. This diagnostic is transmitted to the Transmission Control Module (TCM) via the CAN bus wiring.
^ Requirement for malfunction recognition: No malfunction of the engine RPM and throttle valve signal was recognized, and no load signal was recognized for 245 ms.
^ If a malfunction of the load signal is recognized by the engine control module, this malfunction is communicated to the transmission control module via a transmittal of a duty cycle.