With Code 00545

DTC 00545 / P0702, P1781, P1782

1) Pay attention to which hydraulic control the transmission has when selecting measuring value block.

Note: For malfunction recognition of DTC 00545 / P0702 (only malfunction type "harness connector):
^ Conditions for malfunction recognition: TCM is not receiving throttle position signal or consumption signal. Detected transmission input speed higher than 2000 RPM.
^ This malfunction can only occur on vehicles without CAN-bus A).

A) A differentiation is made between vehicle types with and without CAN-bus. Precise definition of which vehicles are equipped with CAN-bus.