Operation CHARM: Car repair manuals for everyone.

With Code 002971






DTC 17106 / P0722 part 1 of 3





DTC 17106 / P0722 part 3 of 3

1) First check harness connector for corrosion and water ingress, replace if necessary.
2) Sender for transmission output RPM -G195 is also referred to as transmission vehicle speed sensor -G38-.
3) Pay attention to which hydraulic control the transmission has when selecting measuring value block.

Note: For malfunction recognition of DTC 17106 / P0722:
^ Malfunction recognition includes a plausibility test: The ratio from transmission input RPM to engine RPM and transmission output RPM with drive mode selected is implausible. (Test requirement: a driving mode must clearly be selected, not -P- or -N- or between modes and gear must already be engaged).