Without CAN-Bus

Note: DTC 00529 / P0727 for vehicles without CAN-Bus A) (with CAN-Bus see previous DTC):





DTC 00529 / P0727

1) One of these indications is also displayed for the relevant component.
2) Pay attention to which hydraulic control the transmission has when selecting measuring value block.
A) A differentiation is made between vehicle types with and without CAN-bus. Precise definition of which vehicles are equipped with CAN-bus.

Note: For DTC 00529 / P0727 for vehicle types without CAN-Bus A):
^ Malfunction recognition of DTC 005291 P0727 by the TCM is much more sensitive than detection by the ECM. This means that a brief interruption in the throttle position signal (up to 1 second) is not detected by the ECM) but is registered as a malfunction by the TCM.
^ Malfunction detection for DTC 00529 / P0727 is based on a plausibility test relating the signal to the fuel consumption signal (or if not installed to throttle position value).