With Code 00260

DTC 00260 P0758 Part 1 of 2





DTC 00260 P0758 Part 2 of 2

1) One of these indicators is also displayed for the relevent component.
2) First check harness connectors for contact corrosion and water ingress, replace if necessary. If there are malfunctions indicated for solenoid valves. Pay attention to the 16-pin harness connector at Transmission between valve body and Cable harness.
3) Pay attention to which hydraulic control the transmission has when selecting measuring value block.

Note: For malfunction recognition for DTC 00260 / P0758:

^ Short circuit to B+ is already checked with ignition switched on. During operation, all malfunction types are recognized.