ABS/ESP Bosch 5.7, Assembly Overview

ABS/ESP Bosch 5.7, assembly overview





1. Bracket for hydraulic control unit
2. Vacuum pump for brake servo
^ Only on gas Online engines in conjunction with an automatic transmission
3. ABS control module (w/EDL) -J104
^ The ABS hydraulic unit -N55- and the ABS control module (w/EDL) -J104- are combined to form the hydraulic control unit.
4. ABS hydraulic unit -N55- with ABS control module (w/EDL) -J104
^ The ABS hydraulic unit -N55- and the ABS control module (w/EDL) -J104- are combined to form the hydraulic control unit.
5. Sender 1 for brake booster -G201
^ Bolted onto hydraulic control unit
^ Tightening torque 20 Nm
6. ABS hydraulic unit -N55- with ABS control module (w/EDL) -J104
7. Rotor for right-front speed sensor
8. Right front ABS wheel speed sensor -G45
9. Brake fluid level warning switch -F34
10. Instrument cluster
11. Anti-slip control switch -E132
^ Installation location: on the center console
12. Steering angle sensor -G85- for ESP
^ Installation location: in the coil connector with slip ring on steering column
^ Performing zero position compensation- VAS 5051 vehicle diagnostic, testing and information system.
13. Parking brake warning light switch -F9
^ Installation location: on the parking brake lever assembly
14. Rotor for right-rear speed sensor
15. Right rear ABS wheel speed sensor -G44
16. Sensor for transverse acceleration -G200and sender for rotation rate -G202
^ Installation location: underneath the radio
17. Left rear ABS wheel speed sensor -G46
18. Rotor for rear left speed sensor
19. Traction control indicator light -K86
^ Installation location: in instrument cluster
20. ABS warning light -K47
^ Installation location: in instrument cluster
21. Warning light for brake system -K118
^ Installation location: in instrument cluster in driver information system
22. Brake light switch -F
23. Rotor for front left speed sensor
24. Left front ABS wheel speed sensor -G47