Clutch Hydraulic System

Hydraulic system, assembly overview
1. Brake fluid reservoir
2. Supply hose
3. Master cylinder
4. Retainer
^ Replace only with master cylinder removed
^ Removing - Fig. 1
^ Pressing on , Refer to Fig. 2
5. Clutch pedal
6. Self - locking hexagon nut, 25 Nm
^ Always replace
7. O-ring
^ Always replace
^ Pull onto pipe/hose connection
^ Insert with brake fluid
8. Bracket
^ Secured to body
9. Pipe/hose assembly
^ With frequency modulator
^ Allocate using parts Supplier
10. Bleeder connection
11. Clip
12. Bleed valve
^ Bleeding clutch system
13. Dust cap
14. Transmission
15. Slave cylinder (release bearing with hydraulic actuation)
^ Can only be removed after taking out transmission





Fig. 1 Lever retainer - A - off in direction of arrow





Fig. 2 Press master cylinder operating rod into retainer - A - in direction of arrow