Side Airbag Connector, Disconnecting

Side Airbag Connector, Disconnecting







1 - Airbag connector

NOTE:
- Before disconnecting igniter and Ground (GND) wiring, the technician must discharge static electricity by briefly touching door lock striker or bodywork.
- Parts are shown disassembled in magnified views for better illustration.
- Pull retainer tab - 3 - with one finger in direction of arrow - A -.
- At the same time, pull side-airbag connector with other hand to the rear.
- Press retainer tab - 2 - and pull off connector - 1 - in direction of arrow.

2 - Retainer tab
3 - Retainer tab