ABS System Components on Front Axle, Removing and Installing

ABS system components on front axle, removing and installing

1. Hex socket-head bolt
^ Tightening torque: 10 Nm
2. Speed sensor
^ Identical part on left and right
^ Grease all around with lubricating paste G 000 650 before inserting in wheel bearing housing
^ Press home in wheel bearing housing
3. Drive axle with rotor
^ Inspect rotor for signs of dirt and damage
^ If the rotor is damaged, replace the outer CV joint together with the rotor:
^ Outer CV joint is supplied as a replacement part with the rotor
4. Speed sensor wire
^ Attach using the designated retainers
5. Hex socket-head bolt
^ Always replace
^ Different versions Parts Supplier
Vehicle must be standing on the ground when tightening this bolt.
Tightening torque: