Throttle Position Sensor: Locations

Overview Of Component Locations







10 - Throttle Position (TP) sensor -G79- and sender 2 for accelerator pedal position -G185-
- Component location, see Fig. 1
- When replacing, adapt kickdown function, to do so switch on ignition and press accelerator pedal all the way down past the kickdown point and hold in position for at least 20 seconds
- Removing and installing accelerator pedal module

Fig. 1 Component location, Throttle Position (TP) sensor -G79- and sender 2 for accelerator pedal position -G185-







- integrated in accelerator pedal module (arrow)


NOTE: Throttle Position (TP) Sensor -G79- and Sender -2- for accelerator pedal position -G185- are integrated in the accelerator pedal module and cannot be replaced separately.