Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2004 >> A4 Cabriolet (8H7) L4-1.8L Turbo (AMB) >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Relay Box >> Service and Repair >> 9-Way Relay Carrier, Removing and Installing

9-Way Relay Carrier, Removing and Installing




9-way Relay Carrier, Removing And Installing

Removing
- Remove driver's storage compartment







- Remove nuts -3- and remove Vehicle Electrical System Control Module -J519- with cables connected.
- Remove 9-way relay carrier -4-.
- Unclip fuse carrier at 9-way relay carrier.
- Remove relays, control modules, and then unclip respective relay carrier.







NOTE: Precise location of 9-way relay carrier should be taken from appropriate wiring diagram.


Installing
Installation is the reverse of removal.

Tightening torque
9-way relay carrier with vehicle electrical system control module to center tube for instrument panel: 2.4 Nm


pro multis · About Operation CHARM