Shift Lever and Rear Push Rod, Servicing

Selector rod and front push rod, servicing





1 - Rear push rod
2 - Bolt, 6 Nm
^ Qty. 4
^ For fixing rear push rod to gear shift housing
3 - Hex socket-head bolt, 25 Nm
4 - Washer
5 - Hex socket-head bolt, 25 Nm
6 - Clamp
7 - Hex nut, 10 Nm
^ Qty. 4
^ For fixing gear shift housing to body
8 - Hex nut, 10 Nm
^ Self-locking
^ Always replace
9 - Gear shift
10 - Spacer tube
^ Lubricate with polycarbamide grease G 052 142 A2
11 - Selector fork
12 - Bolt
13 - Gear shift housing
14 - Tensioning ring
15 - Boot
^ Remove catalytic converter and front heat shield before removal and assembly

Note:
^ Carefully pull boot over selector rod
^ Position boot on markings of selector rod and push rod

16 - Selector rod
^ With gearshift linkage
17 - Bolt, 23 Nm
^ Self-locking
^ Always replace
18 - Hex socket-head bolt, 40 Nm
^ Cannot be removed from mounting bushing of front push rod
19 - Front push rod