Materials and Minimum Setting Time

Materials

- 2 component window adhesive DA 004 600 A2 1), 2)
- 1 component window adhesive DH 009 100 03 3), 4)
- Glass primer/paint primer D 009 200 02
- Cleaning solution D 009 401 04
- Primer applicator D 009 500 25
- Adhesive remover D 002 000 10
- Cutting cord 357 853 999
- Cutting wire 357 845 955

1) Observe minimum setting time
2) Double cartridge pistol VAS 5237 must be used for applying this material.
3) Heat according to manufacturer's instructions with cartridge heater V.A.G 1939
4) Miniature 110 ml cartridge for sealing and/or for when the 400 ml cartridge is insufficient

Minimum setting times







WARNING!
- For safety reasons, when installing windshield and rear windows, use only nonconductive 2-component adhesive with the designations listed below.
- The vehicle is only safe to operate after the minimum setting times have elapsed, and must not be operated until then.