A-Pillar and Roof Frame Trim, Removing

A-pillar and roof frame trim, removing

1 - Right A-pillar trim
- Remove A-pillar trim.
- Remove door seal in A-pillar area.
- Bore out side hollow rivet heads (Qty. 3), drive rivet shafts out and remove trim.
2 - Roof frame trim
- Remove roof frame trim.
- Before removal, removing left and right A-pillar trim.
3 - Nut
- 6.5 Nm
4 - Pop rivet
5 - Retaining clamp
6 - Left A-pillar trim
- Removal is same as right trim.
7 - Nut
- 6.5 Nm
8 - Retaining clamp
- Movable
9 - Retaining clamp
- Fixed
10 - Retaining clamp
- Movable
11 - Pop rivet







A-pillar trim, removing

- Remove door seal in A-pillar area and remove A-pillar trim.
- Remove nut - 6 -.
- Drill rivet heads off hollow rivets - 2 - and - 7 - and knock rivet shafts through.
- Remove trim - 1 -.
- Upper and lower retaining clips - 3 -must move to balance out tolerances.
- Retaining clip - 5 - is fixed. It is secured to A-pillar with hollow rivets.
4 - Pop rivet