Seat Backrest Wiring Harness, Assembly Overview

Seat Backrest Wiring Harness, Assembly Overview







1 - Connector (3x)
2 - Wiring harness
- Removing
- Remove seat.
- Remove side trim, outboard side.
- Remove side trim, inboard side.
- Remove backrest.
- Remove backrest cover panel.
- Remove cover and padding from backrest.
- Detach cable ties - 3 - (3x).
- Disconnect connectors - 1 - (3x).
- Remove wiring harness - 2 -.
- Installing
- Installation is in reverse order of removal.
3 - Cable ties (3x)