Seat Height Adjuster Unit, Removing and Installing

Seat height adjuster unit, removing and installing

Tools

Special tools, workshop equipment, testers, measuring instruments and other items required

Torque wrench V.A.G 1410












1 - Seat height adjuster lever
2 - Seat height adjuster unit
- Removing
- Remove seat.
- Attach fixture for seat repair VAS 6136 to engine and transmission holder VAS 6095.
- Attach front seat to fixture for seat repair VAS 6136.
- Remove backrest adjuster.
- Remove seat height adjuster.
- Remove side trim on sill panel side.
- Remove bolt - 3 -.
- Remove bolts - 5 - (2x).
- Remove seat height adjuster unit - 2 - and retainer - 4 -.
- Installing
- Install seat height adjuster unit - 2 - in reverse order of removal.
- Make sure retainer - 4 - makes contact with seat pan - arrow -.
- Make sure clip is attached to lever of seat height adjuster - 2 -. Observe installation position.
3 - Bolt
- Tightening torque 8 Nm
4 - Retainer
5 - Bolts (2x)
- Tightening torque 8 Nm