Seat, Assembly Overview

Seat, Assembly Overview

Special tools and workshop equipment required







Torque wrench V.A.G 1331

Removing and installing front seat rail cover for front seat







1 - Front rail cover
- Removing
- Pull handle for forward and backward adjustment and move front seat - 4 - to rearmost position.
- Remove securing clip - 2 - (2x).
- Remove rail cover - 1 - (2x).
- Remove bolts - 3 - (2x).
2 - Securing clip (2x)
3 - Bolt (2x)
- Tightening torque 50 Nm
4 - Front seat

Removing and installing rear rail cover for front seat







1 - Rear rail cover
- Removing
- Pull handle for forward and backward adjustment and move front seat - 4 - forward as far as possible.
- Remove securing clips - 2 - (4x).
- Remove rail cover - 1 - (2x).
- Remove bolt - 3 - (2x).
2 - Securing clip (4x)
3 - Bolt (2x)
- Tightening torque 50 Nm
4 - Front seat


Removing and installing belt mount







1 - Belt mount

NOTE: Height adjustable seat: Raise seat.

- Removing
- Remove cover - 2 - pull upward.
- Remove belt mount - 1 - pull down in direction of - arrow -.
2 - Cover