Navigation Module

Connectors At Rear Of Control Module For Navigation With CD-mechanism -J401







1 - GPS antenna connection
2 - Retainer bar for antenna connection
3 - Multi-pin connector I, 20-pin, consists of
Partial connector, 6-pin, yellow
Partial connector, 6-pin, green
Partial connector, 8-pin, blue
4 - Fuse
5 - Multi-pin connector II, 8-pin, brown
6 - Multi-pin connector III, 8-pin, black
7 - Multi-pin connector IV, 10-pin, red


Chamber Assignments Of Multi-pin Connectors I, II, III, And IV On Reverse Side Of Control Module For Navigation With CD-Mechanism -J401


NOTE: Unmentioned connector terminals are not assigned.







Multi-pin connector I, 20-pin
2 - CAN-high display
5 - CAN-low display
13 - low frequency + (voice output)
14 - Radio muting (output)
15 - low frequency - (voice output)
16 - Telephone low frequency (+)
17 - Telephone muting (input)
19 - Telephone low frequency (-)

Multi-pin connector II, 8-pin, brown
Not assigned







Multi-pin connector III, 8-pin, black
1 - Gala (RPM signal)
2 - Reverse light switch
3 - L diagnostic
4 - Terminal 15
7 - Terminal 30
8 - Terminal 31

Multi-pin connector IV, 10-pin, red
Not assigned