Diagram 25/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Ignition/Starter Switch, Servotronic Solenoid Valve, Servotronic Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

D - Ignition/Starter Switch

J104 - ABS Control Module (w/EDL) Common Modules Overview

J236 - Servotronic Control Module Locations Locations

J285 - Control module with indicator unit in instrument panel insert Common Modules Overview

N119 - Servotronic Solenoid Valve Locations

T6b - 6-Pin Connector, black, connector station A-pillar, left Connector Station

T32a - 32-Pin Connector, green, on instrument panel insert

(44) - Ground connection, on left A-pillar, lower part Locations

(81) - Ground connection -1-, in instrument panel wiring harness

(501) - Threaded connection -2- (30), on the relay plate

(A2) - Plus connection (15), in instrument panel wiring harness

(A27) - Wire Connection (vehicle speed signal), in instrument panel

(A32) - Plus connection (30), in instrument panel wiring harness

* - discontinued (Phased in modification)

** - Phased in modification