Cylinder Head Assembly: Specifications

Cylinder Head
^ Tighten cylinder head bolts in sequence, in two stages.
^ Tighten using torque wrench:
^ 1. Stage: 40 Nm
^ Tighten using a solid wrench:
^ 2. Stage: 180 - (1/2 turn) further





Camshaft Bearing Cap

^ Tighten bolts of guide frame in the sequence of the numbers and follow arrows uniformly by hand.
^ Guide frame must make full contact with cylinder head surface
^ Tighten bolts of guide frame to final tightening torque (10 Nm).





Intake Manifold
Bolt in intake manifold in diagonal sequence in stages (arrows).

Camshaft gear to camshaft 100 Nm
Exhaust manifold to cylinder head 25 Nm
Heat Shield M6 10 Nm
For exhaust manifold M8 25 Nm