6 SPD. M/T 01E

6 SPD. M/T 01E

Clutch with SAC pressure plate





3 - Bolt for flywheel
^ Always replace
^ Screw length 43 mm 60 Nm plus additional 180° turn
^ Screw length 22.5 mm 60 Nm plus additional 90° turn
4 - Clutch plate
6 - Bolt, 25 Nm
^ Tighten in small stages and in diagonal sequence

Fig. 2 Checking ends of the diaphragm spring:

^ Wear up to half the thickness of the diaphragm spring is permitted.

Note: When performing repairs always match up clutch pressure plate and clutch plate by checking engine code (see Parts Catalog).