Transmission, Removing and Installing

Transmission, removing and installing

CAUTION: Before beginning repairs on the electrical system:
^ Obtain the anti-theft radio security code.
^ Switch the ignition off.
^ Disconnect the battery Ground (GND) strap.
^ On vehicles equipped with Audi Telematics by OnStar (R) switch-off the emergency (backup) battery for the Telematic/Telephone Control Module prior to disconnecting vehicle battery.
^ After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows.
^ After reconnecting vehicle battery on vehicles equipped with Audi Telematics by OnStar (R) switch-on the emergency (backup) battery for the Telematic/Telephone Control Module go to Repair Information Communication.





Special tools and equipment
^ 3282 Transmission support
^ 3282/10 Adjustment plate
^ V.A.G 1331 Torque wrench
^ V.A.G 1332 Torque wrench
^ V.A.G 1383 A Engine/transmission lifter

Special tools and workshop equipment required





^ 10-222A Support bar