Lower B-Pillar Trim, Removing and Installing

Lower B-Pillar Trim, Removing And Installing







1 - B pillar trim

- Removal:

NOTE: For removing the lower B-pillar trim, the outer seatbelt anchoring point must not be removed.

- Unclip lower A-pillar trim at rear end.
- Remove upper B-pillar trim.
- Unclip lower clip - 2 - at rear end of B-pillar trim - 1 -.
- Pull lower B-pillar trim - 1 - upward until B-pillar trim disengages from belt guide - 4 -.

- Installing:

NOTE: Ensure that the belt webbing - 3 - is not jammed when installing trim.

- Guide pin - 5 -into hole on shell construction sill.
- Attach upper trim - 1 - to belt guide - 4 -.
- Secure lower rear trim - 1 - with clip - 2 -.
- Clip lower A-pillar trim again at rear.
- Install upper B-pillar trim again.

After assembling trim, make sure seal is properly fitted.

2 - Clip
3 - Belt webbing
4 - Belt guide
5 - Pins