Instrument Cluster / Carrier: Service and Repair

Instrument Cluster, Removing And Installing

Special tools and equipment







- Hook for front end 3370

Removing

NOTE: Instrument cluster is not to be disassembled.

- Determine input values when replacing instrument cluster:

Do this using vehicle diagnostic, testing and information system VAS 5051.
- Pull steering wheel with adjusting mechanism fully out and move it downward.
- Remove steering wheel:







- Pull cover -1- at bottom of instrument cluster off to rear -arrows-.







- Remove bolts -arrows-.







- Pull instrument cluster out to front using special tool 3370.






- Release catches on connectors -arrow- and unplug connectors.

Installing
Install in reverse order, paying attention to the following:
- After installation, perform functional test of instrument cluster.
- If functional test is OK, enter input values for instrument cluster:
Do this using vehicle diagnostic, testing and information system VAS 5051.