Center Floor Assembly Anchorage Points

Center Floor Assembly Anchorage Points

Special tools, testers and auxiliary items required







- Torque wrench V.A.G 1332







1 - Belt latch
- Remove rear seat bench: Vehicles through 10.04, vehicles from 11.04.
- Remove bolt - 4 - (Qty. 1).

- The sealing ring - 5 - must always be replaced.
- When installing, ensure belt latch and/or lap belt engages in rotating knobs.
- The narrow side of the belt latch and/or lap belt must face in direction of travel.

2 - Lap belt
3 - Lap belt with retractor
4 - Screw
- Tightening torque 55 Nm
- Only use original bolt
5 - Seal
- Must be replaced