Rear Lid Lock, Removing and Installing

Rear Lid Lock, Removing And Installing

Assembly overview

As of Vehicle Identification Number (VIN) 400 001







1 - Rear lid
2 - Lid lock
- Removing
3 - Hex nut
- 21 Nm
4 - Cover
- Connected to lid lock as anti-theft device.
5 - Cover for lid lock
- Slide on lid lock before installing rear lid trim.

Removing lid lock
- Remove lower rear lid trim.







- Disengage actuating link - 6 -, for this purpose press expanding clip - 5 - from operating lever.
- Disengage operating rod - 1 - to actuator, for this purpose turn hinge arm - 7 - clockwise and remove operating rod.
- Remove nuts - 2 - and - 4 - and remove rear lid lock - 3 -.
- Tightening torque: 21 Nm

Installing
Installation is performed in the reverse order of removal.