Diagram 10/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Motronic Engine Control Module, Heated Oxygen Sensors





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G39 - Heated Oxygen Sensor (HO2S) Exhaust System

G130 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Exhaust System

J220 - Motronic Engine Control Module (ECM)

J234 - Airbag Control Module

T4 - 4-Pin Connector, brown, connector station Heated Oxygen Sensor (HO2S) (firewall)

T6 - 6-Pin Connector, black, connector station Heated Oxygen Sensor (HO2S) (firewall)

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

Z19 - Oxygen Sensor (O2S) Heater

Z29 - Oxygen Sensor (O2S) Heater 1 Behind Three Way Catalytic Converter (TWC)

(200) - Ground connection (shielding), in engine compartment wiring harness

(A125) - Wire connection (crash signal), in instrument panel wiring harness

* - discontinued from 2003 m. y. (phased in modification)

Previous Diagram 10/9 (Tracks 99-112)

Next Diagram 10/11 (Tracks 127-140)