EVAP Canister, Removing and Installing

EVAP Canister, Removing And Installing
- Remove EVAP canister cover at bottom of spare wheel well.
- Remove sealing pieces above ventilation lines.







- Remove hose connection -1- at ventilation line.
- Disconnect ventilation lines -2- and -3-. To do so, press release ring -4- in direction of arrow -A- and pull off ventilation line (arrow -B-).
- Remove pin bolts (arrows) and remove EVAP canister.

Installing
Installation is the reverse of removal, noting the following:


NOTE: Secure all hose connections using hose clamps appropriate for the model type.


Tightening torques

Component Nm
EVAP canister to chassis 16
Cover for EVAP canister 10