Ignitor For Gas-Discharge Lamps -N195-, Removing and Installing

Ignitor For Gas-discharge Lamps -N195-, Removing And Installing

See Caution before beginning repairs on the electrical system

WARNING - High voltage:
Always disconnect the battery Ground strap before working on parts of the High intensity gas discharge (Xenon) headlights marked with yellow high-voltage warning symbols.

Removing
- Remove headlight.
- Detach cover for dipped beam from headlight housing.
- Detach connector -1- on High intensity gas discharge (Xenon) bulb by turning counter-clockwise.







NOTE: Do not remove retaining spring -arrows-for High intensity gas discharge (Xenon) bulb.







- Remove bolts -arrows-.
- Detach igniter from headlight housing.
- The connector on High intensity gas discharge (Xenon) bulb can then be guided through headlight housing.

Installing
Installation is carried out in the reverse order.