Telephone Receiver Cradle on Center Console, Removing and Installing

Telephone Receiver Cradle On Center Console, Removing And Installing







1 - Threaded hole piece
- Clipped into center console from behind
2 - Center console
- With holes for base plate
- Drilling holes afterward
3 - Mounting plate
- For receiver cradle
4 - Screws (4x)
- Tightening torque 0.5 Nm
5 - Receiver cradle
6 - Telephone handset R37
7 - Base plate
8 - Screw
- Tightening torque 1.5 Nm
9 - Connector

NOTE: Ensure connector is seated correctly.

10 - Screw
- Tightening torque 1.5 Nm