Diagram 54/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Rear Side Airbag Crash Sensors, Rear Side Airbags, Safety Belt Tensioner Igniters





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G256 - Rear Side Airbag Crash Sensor (on driver's side) Airbag Crash Sensors

G257 - Rear Side Airbag Crash Sensor (on front passenger's side) Airbag Crash Sensors

J234 - Airbag Control Module

N153 - Driver's Safety Belt Tensioner Igniter 1 Seat Belt Tensioners

N154 - Front Passenger's Safety Belt Tensioner Igniter 1 Seat Belt Tensioners

N201 - Rear Passenger's Side Airbag (driver's side) Igniter Airbag Component Location

N202 - Rear Passenger's Side Airbag (front passenger's side) Igniter Airbag Component Location

T2y - 2-Pin Connector, lilac, passenger compartment on driver's Seat

T2z - 2-Pin Connector, lilac, passenger compartment on passenger's Seat

T4i - 4-Pin Connector, yellow, connector station passenger compartment, rear left

T4j - 4-Pin Connector, yellow, connector station passenger compartment, rear right

(109) - Ground connection, in airbag wiring harness

- Short circuit bridge becomes effective when connector is unplugged

* - with side airbags rear only

Previous Diagram 54/5 (Tracks 43-56)

Next Diagram 54/7 (Tracks 71-84)