Connector Locations

Overview Of Component Locations







8 - Bracket for harness connectors
- Component location, see Fig. 5
- Accessible with coolant expansion tank unbolted and swung to the side.

Fig. 5 Component location of harness connectors







The following harness connectors are located below the coolant expansion tank:
1 - 3-pin harness connector, green
for Knock Sensor (KS) 1 -G61-
2 - 4-pin harness connector, brown
for Oxygen Sensor (O2S) behind Three Way Catalytic Converter (TWC) -G130- and Oxygen Sensor (O2S) Heater 1 -Z29- (bank 1 sensor 2)
3 - 3-pin harness connector, gray
for Engine Speed (RPM) sensor -G28-
4 - 3-pin harness connector, blue
for Knock Sensor (KS) 2 -G66-
5 - 6-pin harness connector, black
for Heated Oxygen Sensor (HO2S) -G39- before catalytic converter and Oxygen Sensor (O2S) Heater -Z19- (bank 1 sensor 1)







NOTE: Coolant reservoir screw (arrow) must be removed and coolant reservoir must be placed to the side in order to access harness connectors. The coolant hoses remain connected.