Diagram 10/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Motronic Engine Control Module, Engine Coolant Temperature (ECT) Sensor, Charge Air Pressure Sensor, Intake Air Temperature (IAT) Sensor, Wastegate Bypass Regulator Valve, Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 (pulsed ), Recirculating valve for turbocharger





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F66 - Engine Coolant Level (ECL) Warning Switch Locations

F265 - Map Controlled Engine Cooling Thermostat 1.8L T AMB

G2 - Engine Coolant Temperature (ECT) Sensor

G31 - Charge Air Pressure Sensor Component Locations

G42 - Intake Air Temperature (IAT) Sensor Component Locations

G62 - Engine Coolant Temperature (ECT) Sensor Component Locations

J220 - Motronic Engine Control Module (ECM)

J293 - Coolant FC (Fan Control) Control Module

N75 - Wastegate Bypass Regulator Valve Component Locations

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 (pulsed ) Component Locations

N112 - Secondary Air Injection (AIR) Solenoid Valve Exhaust System

N249 - Recirculating valve for turbocharger Component Locations

T10 - 10-Pin Connector, black, connector station E-box, plenum chamber

T10d - 10-Pin Connector, grey, connector station A-pillar, left

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

(220) - Ground connection (sensor Ground), in engine wiring harness

(269) - Ground connection (sensor Ground) -1-, in instrument panel wiring harness

(327) - Ground connection (sensor Ground), in engine compartment wiring harness

(D22) - Connector (over fuse 234), in wiring harness front, right

Previous Diagram 10/5 (Tracks 43-56)

Next Diagram 10/7 (Tracks 71-84)