Diagram 10/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Motronic Engine Control Module, Valve -1- for camshaft adjustment, Secondary Air Injection (AIR) Pump Motor, Camshaft Position (CMP) Sensor, Brake System Vacuum Pump





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor Component Locations

G294 - Brake Booster Pressure Sensor Brake System Vacuum Pump Assembly Overview

J217 - Transmission Control Module (TCM)

J220 - Motronic Engine Control Module (ECM)

J299 - Secondary Air Injection (AIR) Pump Relay Exhaust System

J569 - Brake Booster Relay

N205 - Valve -1- for camshaft adjustment Component Locations

S130 - Fuse for secondary air pump

T10 - 10-Pin Connector, black, connector station E-box, plenum chamber

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

V101 - Secondary Air Injection (AIR) Pump Motor Exhaust System

V192 - Brake System Vacuum Pump Brake System Vacuum Pump Assembly Overview

(12) - Ground connection, in engine compartment, left Component Locations Overview in engine Compartment

(83) - Ground connection -1-, in right front wiring harness

(220) - Ground connection (sensor Ground), in engine wiring harness

(D141) - Connection (5V), in wiring harness engine pre-wiring

* - Automatic transmission (multitronic 01J or AG5) only

** - Automatic transmission (multitronic 01J) only, up to 2003 m. y.

*** - Automatic transmission (multitronic 01J) only, from 2004 m. y.

Previous Diagram 10/7 (Tracks 71-84)

Next Diagram 10/9 (Tracks 99-112)