5 SPD. M/T 01A AWD
5 SPD. M/T 01A AWD
Clutch
1 - Dual-mass flywheel
2 - Bolt for flywheel
^ Always replace
^ Bolt length 22.5 mm 60 Nm plus additional 90° turn
^ bolt length 43 mm 60 Nm plus additional 180° turn
3 - Clutch plate
4 - Pressure plate
5 - Bolt, 25 Nm
^ Loosen and tighten gradually in diagonal sequence
Fig. 1 Centering clutch plate and removing/installing pressure plate:
- Loosen and tighten bolts gradually in diagonal sequence 25 Nm.
Fig. 2 Checking ends of diaphragm spring:
^ Wear down to half the diaphragm spring thickness is permissible.
Note: When performing repairs, always assign clutch pressure plate and clutch plate by way of engine code in fine with Parts catalog.
Fig. 3 Checking spring attachment and rivet attachments:
- Check spring attachment between pressure plate and cover for cracks, check rivet attachments are secure.
- Replace clutches showing damaged springs or loose rivet attachments -arrows-.