Assembly Overview

Assembly Overview

NOTE:
- The printed gap covers on window edges have been discontinued in vehicles as of Vehicle Identification Number (VIN) 400 001.
- New windows without gap covers can be installed retroactively in older vehicles.







1 - Rear window
- Undamaged side window, removing.
- Removing damaged rear window.
- Dimension - a - even out when installing.
2 - Adhesive bead
- Observe curing times.
- Note varying spacing dimensions to window edge.
- Dimension - b - = 6 mm
- Dimension - c - = 38 mm
- Dimension - d - = 6 mm
- Bead cross section
- Bead width = 8 + 2 mm
- Bead height = 13.5 + 1.5 mm
3 - High-mount brake light
- Removed before removing rear window.
4 - Sealing strips
- Pull off before removing rear window.
5 - Seal for rear window wiper

CAUTION: When installing window, the axle of windshield wiper motor must be centered on grommet, otherwise there will be leaks.