Evaporative Emissions System: Locations

EVAP Canister/Leak Detection System, Servicing (Front And All
Wheel Drives)

EVAP canister/leak detection system - component overview

Component Locations, Overview:

1 Cap nut - 10 Nm
2 Cover
- For EVAP canister
3 Stud bolt - 15 Nm
4 Sealing piece
5 Vent line
- to Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
6 Vent line
- From gravity valve at fuel tank
7 Vacuum line
- to Leak Detection Pump (LDP) -V144-
8 Cable ties
- for securing vacuum line to Leak Detection Pump (LDP) bracket
9 Leak Detection Pump (LDP) -V144-
- Component location: Under wheel housing liner in rear left wheelhousing Checking
10 Electrical 3-pin harness connector
- Black
11 Connection hose
- Leak Detection Pump (LDP)/EVAP canister Pressure side
- to remove, press release button at connection on Leak Detection Pump (LDP)
12 10 Nm
13 Air filter housing
- for Leak Detection Pump (LDP) -V144- no maintenance procedure
14 Sealing piece
15 Cable ties
- for securing connection hose to wheel housing
16 EVAP canister
- Component location: Bottom of spare tire well