Rear Lid Trim, Removing and Installing

Rear Lid Trim, Removing And Installing







1 - Rear lid trim
- Remove hazard warning triangle.
- Remove screws - 4 - (2x).
- Remove bracket for hazard warning triangle - 5 -.
- Remove screws - 2 - (2x).
- Remove screws - 3 - (2x).
- Unclip trunk lid trim - 1 - from underneath.
2 - Screws (2x)
- Tightening torque: 1.5 Nm (13 in lb)
3 - Screws (2x)
- Tightening torque: 1.5 Nm (13 in lb)
4 - Screws (2x)
- Tightening torque: 1.5 Nm (13 in lb)
5 - Bracket for hazard warning triangle