Rear ABS Wheel Speed Sensor Rotor (FWD), Removing and Installing

ABS wheel speed sensor rotor (FWD), removing and installing

Special tools and equipment
^ 80-200 pry lever

Removing
- Remove wheel bolts.
- Raise vehicle.
- Remove wheel.





^ Remove bolts -A- and use wire to support brake caliper housing to body.
- Remove retainer for ABS wheel speed sensor.
- Pry ABS wheel speed sensor from wheel bearing/hub unit using 80 200 pry lever.





- Remove socket-head bolts from wheel bearing/hub unit and remove wheel bearing/hub unit with backing plate.

Installing
If ABS wheel speed sensor rotor is damaged or dirty, replace rotor together with wheel bearing/hub unit.
- Install new wheel bearing/hub unit and backing plate to axle beam and tighten to 60 Nm.
- Insert brake disc.
- Mount brake caliper to axle beam and tighten to 95 Nm.
- Install ABS wheel speed sensor.
Note installation position.
- Insert retrainer for ABS wheel speed sensor.