Gear Set, Adjusting and Marking

5 SPD. A/T 01L AWD

Gear set, adjusting and marking





1. Identification "0937" means the Oerlikon gear set with a ratio of 37: 9.
2. Pairing number (312) of gear set.
3. Dimension "r" Is based on the master gauge used on the test bench during production. Dimension 'Y' Is always given In 11100 mm. Example: "25" means r=0.25 RIM
Ro - Length of test machine master gauge used
Ro - ring gear = 57.50 mm
R - Actual dimension between ring gear axis and face of drive pinion In position of quietest running for this gear set
R = Ro + r
Vo - Hypoid offset