Component Overview

Component Overview







1 Secondary Air Injection (AIR) Pump Relay -J299-
- Component location, See Fig.3
2 Motronic Engine Control Module (ECM) - J220-
3 Combination valve for secondary air injection (AIR)
4 Secondary Air Injection (AIR) Solenoid Valve -N112-
5 Secondary Air Injection (AIR) Pump Motor -V101-
6 Check-valve
- Installation position (light/dark side): Arrow points in direction of flow, as shown in figure.
7 To Intake manifold
8 Combination valve for secondary air injection (AIR)
9 Vacuum reservoir
- Component location: Under wheel housing liner in front left wheel housing

Fig. 3 Secondary Air Injection (AIR) Pump Relay -J299-* (-1-) with fuse -2- in protective housing (engine compartment, left)







NOTE:
- Remove battery Ground (GND) strap if tools are necessary for removal of relays or control modules from the relay carrier.
- Obtain radio code for radios with anti-theft coding before disconnecting battery.
- Check activation of the Secondary Air Injection (AIR) Pump Relay.