Servotronic, Assembly Overview

Servotronic, assembly overview





1. Power steering gear with tie rods
2. Connector for Servotronic
3. Relay carrier, 13-pin
^ Located under trim in drivers footwell
^ Relay for Servotronic control module -J236 (position 13)
^ Checking voltage supply
^ Checking speed signal
4. Socket-head bolt, 3 Nm
^ 2.5 mm

Note: Do not open Torx bolts!

5. Servotronic solenoid valve -N119-
^ Steering gear must be removed to replace Servotronic valve.

Note: Do not open Torx bolts!

6. Seal
^ Always replace
7. Seal
^ Always replace
8. Sieve
^ Always replace